Extron electronics SW USB Series Provozní pokyny stáhnout pdf (Strana 14)

Installation, cont’d

SW USB Series • Installation

2-4

PRELIMINARY

Rack mounting procedure

1. If feet were previously attached to the bottom of the switcher, remove them.

2. Mount the SW USB Series switcher on the rack shelf, using two

4-40 x 3/16 inch screws in opposite (diagonal) corners to secure the unit to the

shelf (see the illustrations on the next page).

. Install blank panel(s) or other unit(s) on the rack shelf as desired.

4. Install the shelf in the rack.

The following illustrations show examples of how the SW USB can be mounted on

different sized rack shelves.

HalfRackVersaToolsShelf

(2) 4-40 x 3/16"

Screws

Use 2 mounting holes on

opposite corners.

VersaTools Rack Shelf

1/2 Rack Width Front

False Faceplate

Mounting an SW USB switcher on a 3.5-inch deep VersaTools rack shelf

Use 2 mounting holes on

opposite corners.

(2) 4-40 x 3/16"

Screws

1U Universal Rack Shelf

Front false

faceplate

uses 2

screws.

1/2 Rack Width Front False

Faceplate

Mounting an SW USB switcher on a standard 9.5-inch deep rack shelf

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 45 46

Žádné komentáře

Extron electronics SW USB Series Provozní pokyny Strana 14