Setup Guide — RGB 580xi AAP and CC AAP Series
Extron USA - West
Headquarters
+800.63 3.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517 FA X
Extron USA - East
+800.63 3.9876
Inside USA / Canada Only
+1.919.863.1794
+1.919.863.1797 FA X
Extron Europe
+800.39 87.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.638 3.44 00
+65.638 3.46 64 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FA X
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
© 2009 Extron Electronics. All rights reserved.
68-537-50
Rev. A
11 09
b
LED connector (J2) — This connector is used for powering the green/amber LED. Wire
the appropriate connector as shown below.
Green LED (pink)
LED ground (yellow)
Amber LED (orange)
Pin 1
Pin 1
Green LED (pink)
LED ground (yellow)
Amber LED (orange)
c
Audio output connector — This connector is used for unbalanced stereo
audio output. Wire the connector as shown below.
Pin 1
Audio right (red)
udio ground (black)
Audio right (white)
Step 3 — Audio connect
Wire a 3.5 mm stereo plug for unbalanced audio input
as shown at right.
Step 4 — Mount the AAP
Insert the AAP device’s screws through the holes in the AAP double-space faceplate, the AAP
wall plate, or the Cable Cubby AAP shelf bracket. Secure the AAP device to the faceplate/wall
plate/shelf bracket with the provided captive washers and #4-40 nuts. See the examples below.
Cable
Cable
Clamp
RGB 580xi SI AAP
AAP 102
AAP 102
#4-40 Nut w/ Captive
Washer
RGB 580xi SI AAP
COMPUTER
AUDIO
H SHIFT
INPUT
SELECT
Wall Plate
Operation
The RGB 580xi AAP models S, SI, CCS, and CCSI have a front panel horizontal shift control
knob. The SI and CCSI models also have an input select button.
Horizontal shift control knob — While viewing the displayed image, rotate this control to
move the image to the right or left on the screen. The power/signal LED will flash green
whenever the minimum and maximum limits of this control are reached.
Input select button — Pressing this button results in contact closure between pins A and B of
the contact closure connector on the front panel of the RGB 580xi remote interface. This button
can also be used for direct control of any Extron contact closure-controlled switcher, or as a
direct connection to an external control system.
RGB 580xi CCSI AAP
Cable Cubby
INPUT
SELECT
H. SHIFT
Sleeve ( )
Ring (R)
Tip (L)
(185 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce