Extron-electronics LANCIAxi User Guide Uživatelský manuál stáhnout pdf (Strana 24)

Extron • SENTOSA

LQ & LANCIA

LD • User’s ManualPage 3-3

Time-out

Pauses 10 seconds or longer between command sequence ASCII

characters will result in a Time-out. The command operation is

aborted with no other indication that a Time-out has occurred.

Error Responses

When a command is received from the Host, if the Sentosaxi/

Lanciaxi detects an error, it will return an error response. Possible

error responses with a brief description follow:

• E01

Invalid input channel number (out of range)

• E06 Auto-switch mode active (rear panel DIP switch #1 =enable)

• E10

Invalid command (Command received is invalid)

• E13 Invalid value (out of range)

Sentosa

xixi

xi/Lancia

xixi

xi-Initiated Messages

When a local event takes place, such as a front panel operation or

an error condition, the Sentosaxi/Lanciaxi responds by sending a

message to the Host. No response from the Host is expected.

These Sentosaxi/Lanciaxi-initiated messages are listed below

(underlined to identify actual message).

This message is initiated by the Sentosa

/Lancia

when it is first

powered on. (Model = Sentosa

or Lancia

), (x.xx is the software

version number)

Reconfig

RS-232 - Overrun

RS-232 - Noise

RS-232 - Framing

RS-232 - Overflow

RAM Test Failed

ROM Checksum Failed

Serial EEPROM Checksum Failed

6811 EEPROM Checksum Failed

New 6811 Installed

New Serial EEPROM Installed

Invalid Jumpers - Unknown - xxxx

Factory Defaults Reset on Channel #1

Factory Defaults Reset on Channel #2

RS-232/REMOTE Control

These Sentosa

/Lancia

-initiated messages

indicate an RS-232 communication error.

Possible causes are RS-232 connection

problem, Baud rate, etc.

Call Extron Technical Support if

any of these Sentosa

/Lancia

initiated messages are reported.

Call Extron Technical Support.

Reported if Freeze button is

depressed during power-up.

This message is initiated by the Sentosa

/Lancia

when there is a change in the selected input or any

picture control setting.

1 2 ... 19 20 21 22 23 24 25 26 27 28

Komentáře k této Příručce

Žádné komentáře

Extron-electronics LANCIAxi User Guide Uživatelský manuál Strana 24

Komentáře k této Příručce

Související produkty a manuály pro Hardware Extron-electronics LANCIAxi User Guide