Extron-electronics Cable Retraction System Setup Guide Uživatelský manuál stáhnout pdf (Strana 2)

Cable Retraction System • Setup Guide (Continued)

Getting Started — Determine Under-table Clearances

The diagrams below and on the next page show the space required for a retraction system installation in a Cable Cubby

enclosure.

NOTES:

• To prevent objects from impeding cable retraction, ensure at least 3inches of clearance from the

exposed cable side of the enclosure.

• Excess cabling may cause clearance issues. Use zip ties to secure under‑table cabling to prevent

accidental contact or entanglement with users.

For new installations:

Choose the optimal furniture mounting location for the Cable Cubby enclosure. The nal location may require some adjustment

depending upon under‑table clearances required for the retraction system. Once the location has been determined, follow the

instructions provided with the enclosure to mount the enclosure and install AAP brackets, AAPs, and the power module.

For retroﬁt installations:

For most installations, the Cable Cubby enclosure does not require removal. Disconnect all power to the CableCubby before

retraction system installation.

Cable Retraction System • Getting Started

1.6" (4.1 cm)

23.4"

(59.3 cm)

1.6" (4.1 cm)

29.3"

(74.5 cm)

Vertical Mounting Clearance

XL Models

Horizontal Mounting Clearance

XL Models

9.1"

(23.0 cm)

15.3"

(38.9 cm)

16.7"

(42.5 cm)

3.0"

(7.6 cm)

9.1"

(23.0 cm)

21.4"

(54.4 cm)

23.0"

(58.5 cm)

3.0"

(7.6 cm)

1 2 3 4 5 6 7 8 9 10

Komentáře k této Příručce

Žádné komentáře

Extron-electronics Cable Retraction System Setup Guide Uživatelský manuál Strana 2

Komentáře k této Příručce

Související produkty a manuály pro Hardware Extron-electronics Cable Retraction System Setup Guide