Extron-electronics CC 200 Retractor Uživatelský manuál stáhnout pdf

CC 200 Cable Retractor Adapter Kit

Planning

Before installing the adapter, be certain there is

adequate space under the table for the retractable system with the

attached bracket.

Determine the retractor mounting orientation: horizontal or vertical.

If only one retractor is mounted, use a ﬁller module, part #70-678-08

in place of the second retractor.

If mounting horizontally, the horizontal

bracket kit, part #70-678-00, is required.

68-1894-50

Rev. B

06 11

The CC 200 Bracket Kit, part #70-678-10, allows one

or two Cable Retractors to be installed in the

Cable Cubby

200 enclosure. The bracket kit

adapts the AAP opening of the enclosure to

allow the installation of a Cable Retraction

System for Cable Cubby Enclosures.

CC 200 Cable

Retractor Bracket Kit

(x4)

CC 200

Bracket

Horizontal Mounting Clearance

9.0" (228.6 mm)

3.0"

(76.2 mm)

13.6" (345.4 mm)

CC 200

Bracket

Vertical Mounting Clearance

3.0"

(76.2 mm)

23.3" (591.8 mm)

0.33" (8.4 mm)

NOTE: To prevent objects from impeding

cable retraction, ensure at least

3 inches of clearance from the

exposed cable side of the enclosure.

1 2

Shrnutí obsahu

Strany 1 - Planning

CC 200 Cable Retractor Adapter KitPlanningBefore installing the adapter, be certain there is adequate space under the table for the retractable system

Strany 2 - Retractor Assembly

Bracket and Retractor MountingWARNING: Disconnect power from the Cable Cubby 200 power module before beginning installation.1. Using the mounting bo

Komentáře k této Příručce

Žádné komentáře

Extron-electronics CC 200 Retractor Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Extron-electronics CC 200 Retractor. Extron Electronics CC 200 Retractor User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Hardware Extron-electronics CC 200 Retractor