Extron electronics MediaLink Controllers MLC 104 Series Uživatelský manuál stáhnout pdf (Strana 3)

System Configuration

Extron creates and administers a wide selection of commonly used

projector control drivers. These RS-232 drivers are essential for the MLC 104

to effectively communicate with a display device. They enable the MLC 104

to control basic projector functions such as power, input selection, and

volume adjustment.

The MLC 104 is designed to work with almost every Extron switcher,

including the MediaLink Switchers (MLS) and VersaTools™ MediaLink

Switchers, which are specifically designed to complement MediaLink

controllers. Each product of the MLS line switches video, computer-video,

and/or audio and provides unique features such as volume and tone

control. The MLC 104 can also work as a stand-alone device to control a

projector without the aid of a switcher.

IP Link

™

Ethernet Control

The MLC 104 IP is equipped with Extron's IP Link, an IP integration

technology specifically engineered to meet the needs of professional A/V

environments — from small K-12 classrooms to large universities and

businesses. IP Link Global Viewer, a free Web-based asset management and

remote control software application, is specifically designed to work with

products that include IP Link technology. It facilitates key asset

management functions including:

•

Proactive maintenance – The Global Viewer can store and display

information about connected devices like serial numbers, owner

identification, maintenance history, and installed firmware versions. This

centralized data can be collected and used to reduce maintenance costs

and guide future purchasing decisions. For instance, a projector can be

polled routinely to track lamp usage and total life time. When lamp

usage reaches a predetermined number of hours, the MLC 104 IP can

send a report via e-mail.

•

Event scheduling – The Global Viewer uses the real-time clock and

calendar in IP Link-enabled devices to maximum value. User-defined tasks

are easy to configure and schedule with the Global Viewer Configurator

(GVC) and don’t require high-level programming skills. For instance, an

administrator can schedule all projectors to turn off every Friday at close

of business.

•

Remote technical support – Technicians can troubleshoot systems

remotely because the Global Viewer provides the real-time status of

connected devices. Information such as connection status, power state,

and current input selection is displayed in a central location. For many

connected devices, technicians can toggle power on or off, switch

sources, control volume, and more without leaving their office. Many

common problems can be resolved without a trip to where the

equipment is located.

•

Theft alerts – IP Link-enabled products are always on and routinely poll

their attached devices for status information. If any serially controlled

device such as a projector or display is physically disconnected from the

serial port, the MLC 104 IP monitoring its status will know immediately.

In such an event, it can send an e-mail message notifying security

personnel of the possible theft. For fast action, e-mails can be sent to

multiple addresses including cell phones and wireless PDAs.

The Extron

MLC 104 MediaLink Controllers are easy-to-use, simplified

control panels for any small classroom or boardroom. They standardize the

control interface for all systems, making projection systems simple to use.

Standardization also makes setup and maintenance easier to support.

The flexible MLC 104 acts as an extended remote control panel. It is not a

switcher; instead, as a controller, it tells the projector when to switch

between its various inputs. Presenters with little or no training can walk into

any multimedia classroom and operate the A/V system. The MLC 104

includes universal projector control for a projector’s power, input switching,

and volume control. For one-button functionality, the MLC 104 features

backlit buttons that can be custom-labeled for easy identification. Because

the buttons illuminate, they are helpful for presenters in low-light

environments.

The MLC 104 IP features Extron's innovative IP Link

™

Ethernet control

technology to enable remote diagnostics, asset management and support.

Especially vital for high traffic areas, the MLC 104 and MLC 104 IP are

housed in secure two-gang enclosures. They have the same look and

functionality regardless of where they are mounted: a lectern, desk, wall,

rack, or wall box.

■ Universal projector control – The MLC 104 has a dedicated port for

communicating with virtually any projector or display via IR or

RS-232. Control drivers can be downloaded or created using the

intuitive software.

■ Projector power control – Discreet ON and OFF backlit buttons

simplify system operations and eliminate the need for external

projector remote.

■ Bi-directional RS-232 port for universal projector control – The

MLC 104 has a dedicated port for communicating with virtually any

projector or plasma via IR or RS-232. Control drivers can be

downloaded or created using the intuitive software.

■ RS-232 port for MediaLink switcher support – For controlling an

optional Extron MediaLink switcher, such as the MLS 406SA.

■ IP firmware upgrade – The MLC 104 models without IP Link can be

field upgraded to full IP-enabled devices with the same functionality

as the MLC 104 IP models.

■ Configurable buttons – can be set up to trigger a variety of

functions such as selecting an input, sending a serial or IR command,

or controlling a relay.

■ Tri-color, backlit, easy to label buttons – can be customized for

each installation and provide easy operation for presenters in low-

light environments.

■ Inactivity timer for display shut-off – Adjustable timer control

provides automatic shutdown to preserve energy, prevent plasma

burn-in, or extend projector lamp life.

■ Front panel security lockout – When the security lock-out mode is

engaged, the MLC 104’s front panel becomes inoperable unless a

user-defined PIN number is entered.

■ Volume control – Volume control provides adjustment of projector or

MediaLink switcher audio levels, allowing for convenient, centralized

control without additional remotes. The five LEDs provide clear

indication of the current audio setting.

■ Secondary Control Panel – The optional SCP 104 duplicates the

MLC 104’s front panel buttons and offers a second access point within

a room.

■ AAP openings – The MLC 104 AAP and MLC 104 IP AAP fit into four-

gang wall plates and include four single space Architectural Adapter

Plate (AAP) openings. Blank AAPs are not included. The openings

allow for integration with many of Extron’s AAPs, including signal

pass-through connections.

■ Color choices – The MLC 104 controllers are available in black, white,

or RAL9010 white for architectural integration.

■ Mounting options – Flexibility in installation allows for numerous

architecturally compatible possibilities.

SPECIFICATIONS

FEATURES

DESCRIPTION

CONTROL/REMOTE — MLC CONTROLLER HOST PORTS

Serial control port ............................ 2 RS-232: (1) 3.5 mm direct insertion captive

screw connector, 3 pole; 1 front panel

2.5 mm TRS jack

Baud rate and protocol .................... 38400, 8 data bits, 1 stop bit, no parity

Serial control pin configurations........ Direct insertion captive screw connector:

1 = TX, 2 = RX, 3 = GND

2.5 mm TRS jack: tip = TX, ring = RX,

sleeve = GND

Ethernet control port ........................ 1 RJ-45 female

Ethernet data rate ............................ 10/100Base-T, half/full duplex with autodetect

Ethernet protocol .............................. ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP,

SMTP

Ethernet default settings.................... Link speed and duplex level = autodetected

IP address = 192.168.254.254,

subnet mask = 255.255.0.0,

default gateway = 0.0.0.0 DHCP = off

Extron remote key pad control.......... (1) 3.5 mm direct insertion captive screw

connector, 3 pole

Program control ................................ Extron’s configuration program for Windows

Extron’s Simple Instruction Set (SIS

™

)

Microsoft

Internet Explorer, Netscape

Navigator

, Telnet

CONTROL — PROJECTOR/DISPLAY

Projector control port........................ (1) 3.5 mm direct insertion captive screw

connector, 3 pole programmable for RS-232

control (±5 V) or TTL level (0 to 5 V) infrared

control up to 1 MHz

Baud rate and protocol (RS-232) ...... 115200, 57600, 38400, 19200, 9600

(default), 4800, 2400, or 1200 baud

(configurable); 8 data bits; 1 (default) or 2

stop bits; no parity (default), or even or odd

parity

CONTROL — SWITCHER

Switcher control port ........................ (1) 3.5 mm direct insertion captive screw

connector, 3 pole, for RS-232 control (±5 V)

Baud rate and protocol .................... 115200, 57600, 38400, 19200, 9600

(default), 4800, 2400, or 1200 baud

(configurable); 8 data bits; 1 (default) or 2

stop bits; no parity (default), or even or odd

parity

GENERAL

Power................................................ Supplied by an optional MediaLink

™

switcher

or the included external power supply

External power supply ...................... 100 VAC to 240 VAC, 50/60 Hz, external,

autoswitchable; to 12 VDC, 1 A, regulated

Power input requirements ................ 12 VDC, 0.5 A

Rack mount ...................................... Yes, with optional rack mounting kits, and

also wall- and furniture-mountable with

optional mounting kits

Enclosure type .................................. Metal

Enclosure dimensions

MLC 104 faceplate ...................... 4.5" H x 4.6" W x 0.1" D (11.4 cm H x 11.7

cm W x 0.3 cm D) (2 gang)

MLC 104 AAP faceplate................ 4.5" H x 8.3" W x 0.1" D (11.4 cm H x 21.2

cm W x 0.3 cm D) (4 gang)

Device .............................................. 2.75" H x 3.5" W x 1.8" D (7.0 cm H x

8.9 cm W x 4.6 cm D) (fits some 2 gang

boxes) (Depth excludes knob and buttons.)

Product weight ................................ 1.9 lbs (0.9 kg)

Shipping weight................................ 6 lbs (3 kg)

Vibration .......................................... ISTA 1A in carton (International Safe Transit

Association)

Listings.............................................. UL, CUL

Compliances .................................... CE, FCC Class A, VCCI, AS/NZS, ICES

MTBF ................................................ 30,000 hours

Warranty .......................................... 3 years parts and labor

NOTE: All nominal levels are at ±10%

Specifications are subject to change without notice.

Model Part Numbers

MLC 104 (Controller Only) .................. 60-665-00

MLC 104 (black) .................................. 60-665-02

MLC 104 (white) .................................. 60-665-03

MLC 104 (RAL9010 white).................... 60-665-05

MLC 104 L (black) ................................ 60-665-32

MLC 104 L (white)................................ 60-665-33

MLC 104 L (RAL9010 white) ................ 60-665-35

MLC 104 AAP (black)............................ 60-665-12

MLC 104 AAP (white) .......................... 60-665-13

MLC 104 AAP (RAL9010 white) ............ 60-665-15

MLC 104 IP (Controller Only) .............. 60-573-00

MLC 104 IP (black) .............................. 60-573-02

MLC 104 IP (white) .............................. 60-573-03

MLC 104 IP (RAL9010 white)................ 60-573-05

MLC 104 IP L (black) ............................ 60-573-32

MLC 104 IP L (white)............................ 60-573-33

MLC 104 IP L (RAL9010 white) ............ 60-573-35

MLC 104 IP AAP (black) ........................ 60-573-12

MLC 104 IP AAP (white) ...................... 60-573-13

MLC 104 IP AAP (RAL9010 white) ........ 60-573-15

Included Accessories

MLC 104 / MLC 104 AAP

12V/1Amp power supply .................... 70-055-01

2-gang/4-gang mud ring .................... 70-086-X1/X3

Button labels text ................................ 33-954-01

Button labels icon ................................ 33-955-01

9 pin, 2.5mm RS-232 Cable ................ 70-355-01

MLC 104 L

12V/1Amp power supply .................... 70-055-01

Button labels text ................................ 33-954-01

Button labels icon ................................ 33-955-01

9 pin, 2.5mm RS-232 Cable ................ 70-355-01

MLC 104 IP / MLC 104 IP AAP

12V/1Amp power supply .................... 70-055-01

2-gang/4-gang mud ring .................... 70-086-X1/X3

Button labels text ................................ 33-954-01

Button labels icon ................................ 33-955-01

6’ RJ-45 crossover cable ...................... 26-591-01

MLC 104 IP L

12V/1Amp power supply .................... 70-055-01

Button labels text ................................ 33-954-01

Button labels icon ................................ 33-955-01

6’ RJ-45 crossover cable ...................... 26-591-01

Optional Accessories

SCP 104................................................ 60-672-XX

UC 50’ .................................................. 26-518-01

IR Emitter .............................................. 70-283-01

9 pin 2.5 RS-232 Cable ........................ 70-335-01

MLA-VC10 ............................................ 60-502-01

2-gang mudring.................................... 70-086-0X

4-gang mudring.................................... 70-086-0X

Display power sensor ............................ 60-271-01

IR broadcaster ...................................... 60-272-02

P/S 100 power supply .......................... 60-357-01

12V/1Amp power supply ...................... 70-055-01

2-gang back box .................................. 980057/980084

4-gang back box .................................. 980097

EWB-2-gang.......................................... 60-453-0x

EWB-4-gang.......................................... 60-455-0x

EWB-10X8 ............................................ 60-457-0x

SMB-2-gang.......................................... 60-640-02

SMB-4-gang.......................................... 60-642-02

SMB-6-gang.......................................... 60-644-02

UCM 10x8 ............................................ 70-341-02/03

UCM RAAP............................................ 70-344-02/03

MLM 104 6GWP .................................. 70-355-02

MLM 104 LAAP .................................... 70-357-02/03

MLM 104 EC (RAL9010 white).............. 70-357-10

MLM 104 MK ...................................... 70-357-2X

MLM 104 AAP EC (RAL9010 white) ...... 70-358-10

Button label int’l .................................. 33-1167-0X

MLS 100 A ............................................ 60-497-01

MLS 102 VGA ...................................... 60-497-04

MLS 103 V ............................................ 60-497-02

MLS 103 SV .......................................... 60-497-03

MLS 304MA/SA .................................... 60-550-01/02

1 2 3 4

Komentáře k této Příručce

Žádné komentáře

Extron electronics MediaLink Controllers MLC 104 Series Uživatelský manuál Strana 3

Komentáře k této Příručce

Související produkty a manuály pro Síťové přepínače Extron electronics MediaLink Controllers MLC 104 Series