Extron-electronics TPS150 User Guide Uživatelský manuál Strana 19

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 54
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 18
2-7TPS150 Switching and Transmission System • Installation
Video output connections
1
2
RGB/VGA video connector — Connect a VGA cable between this 15-pin HD
female connector and the VGA or RGB input on the display.
1
3
Composite video connector — Connect a video cable between this BNC
female connector and the composite video input on the display.
1
4
S-video connector — Connect an S-video cable between this 4-pin mini DIN
female connector and the S-video input on the display.
1
5
Component video connector — Connect a cable between these BNC female
connectors and the component video input on the display.
Serial connection
1
6
RS-232 connector — Connect a serial cable (figure 2-6) between this 9-pin D
connector and the RS-232 connector on the display for control of the display.
Power connection
1
7
AC power connector — Plug a standard IEC power cord into this connector
to connect the receiver to a 100 to 240VAC, 50 Hz to 60 Hz power source.
The receiver is protected by a 1.6 A, 250 V, time delay fuse. If replacement is
necessary, replace with the same amperage and voltage rating.
Zobrazit stránku 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 53 54

Komentáře k této Příručce

Žádné komentáře