
RGB 460xi Series • Specifications, Parts, and AccessoriesA-2
Specifications
Video
Gain ............................................... Unity (0.7V), 15% with 3dB peaking (0.8V), 30%
with 6dB peaking (0.9V)
Bandwidth ............................................ 300 MHz (-3dB)
Video input and loop through
Number/signal type
RGB 460xi Dual ...................... 2 analog RGBHV, RGBS, RGsB
All other models .................... 1 analog RGBHV, RGBS, RGsB
Connectors
RGB 460xi /460xi EC/460xi FSR/464xi/468xi/468 Mxi/468xi EC/
468xi AKM UK ....................... (1) 15-pin HD female buffered input connector
and
(1) 15-pin HD female local monitor loop
through connector
RGB 460xi Dual ...................... (2) 15-pin HD female buffered input connectors
and
(2) 15-pin HD female local monitor loop
through connectors
Nominal level ...................................... 0.7V p-p for RGB
Minimum/maximum levels .............. Analog: 0.3V to 1.45V p-p with no offset at
unity gain
Impedance ............................................ 75 ohms or Hi Z, switchable (set to 75 ohms if
no local monitor is connected)
Horizontal frequency ......................... 15 kHz to 150 kHz (optimum 15 kHz to 62
kHz)
Vertical frequency ............................... 30 Hz to 170 Hz
Return loss ........................................... <-30dB @ 5 MHz
Video output
Number/signal type
RGB 460xi Dual ...................... 2 separate analog RGBHV, RGBS, RGsB
All other models .................... 1 analog RGBHV, RGBS, RGsB
Connectors
RGB 460xi Dual ...................... 2 x 5 BNC female on 2” to 2.5” cables
All other models .................... 5 BNC female on 2” to 2.5” cables
Nominal level ...................................... 0.7V p-p for RGB
Minimum/maximum levels .............. Analog: 0.7V to 0.9V p-p (switch selectable) w/
peaking and 0.7V p-p input
Impedance ............................................ 75 ohms
Return loss ........................................... <-30dB @ 5 MHz
Komentáře k této Příručce