Extron-electronics RGB 203 Rxi User Guide Uživatelský manuál stáhnout pdf (Strana 15)

5. Monitor follows

This switch controls the input assigned to the local monitor output and ID bit

termination.

On — The local monitor connector follows the input selection and ID bits 4 and 11

are tied to ground.

Off — The local monitor output connector is locked to input 1 and ID bits 4 and 11

are unterminated.

6. Mono audio left

On — Mono audio is output in the left channel only.

Off — Output is normal stereo audio.

7. Auto switching

On — The interface automatically switches to the highest numbered input with sync

present.

Off — The input must be switched manually.

NOTE: Auto switch works for RGBHV and RGBS inputs only. Auto switch does

not work for RGsB input.

8. Backlight illumination

This switch controls illumination of the LCD backlight.

On — The LCD backlight is off, except for three seconds at power-up.

Off — The LCD backlight is on while a signal is present at the selected input.

RGB 203 Rxi • Conguration 9

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Žádné komentáře

Extron-electronics RGB 203 Rxi User Guide Uživatelský manuál Strana 15