Extron-electronics ES3610_11 User Guide Uživatelský manuál stáhnout pdf (Strana 19)

ES3610/11 User Guide Section 2: Installation

I447GB issue 6 Page 19

Mains Power Connection (via PSU)

The RGB ADAPTER must be powered from a 12 Volt DC regulated supply. A suitable mains-operated

power supply unit (PSU) is provided. The mains connection details that follow relate to the PSU.

NEVER CONNECT THE RGB ADAPTER DIRECTLY TO THE MAINS.

ALWAYS use the PSU provided. If a backup/replacement PSU is required,

always use an Electrosonic approved PSU.

Supply Requirements (for PSU)

ALWAYS observe the following instructions to ensure safe and reliable

operation of the PSU.

ALWAYS ensure that the mains supply voltage is single phase only and is within the permitted range:

• 100 – 240V AC (0.45A Max.) 50 – 60Hz.

NEVER connect the PSU to a DC supply.

DO NOT allow the mains power point to be overloaded. This is particularly important to check when

powering several items of equipment from a single power point (e.g. within rack-mounted

installations).

WARNING: To avoid the possible risk of electric shock or product damage due to condensation,

ALWAYS allow the PSU to become acclimatized to ambient temperature and humidity for at least

thirty minutes BEFORE switching on. This is particularly important when moving the unit from a cold

to a warm location.

NOTE: The PSU is double-insulated and does not require an earth/ground connection.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 58 59

Žádné komentáře

Extron-electronics ES3610_11 User Guide Uživatelský manuál Strana 19