Extron-electronics IPCP Pro Series Setup Guide Uživatelský manuál stáhnout pdf

IMPORTANT:

Go to www.extron.com for the complete

user guide, installation instructions, and

specifications before connecting the

product to the power source.

IPCP Pro Series • Setup Guide

The Extron IPCPPro Series IPLink

Pro Control Processors integrate Ethernet connection into AV systems to allow users to

remotely control, monitor, and troubleshoot AV equipment, including display devices and switchers. These control processors

include an embedded web server. Depending on the model, an IPCPPro control processor can include multiple bidirectional

serial ports, relays, IR/serial ports, digital I/O, flex I/O, switched 12 VDC power output ports, a volume control port, or contact

input ports for use in applications that require control and monitoring of multiple devices within a large-scale AV system.

This guide provides instructions for an experienced installer to install an IPCPPro Series control processor and to create a

basic configuration. Configure the control processor using Extron Global Configurator software running in Global Configurator

Professional (GCProfessional) or Global Configurator Plus (GC Plus) mode. The IPCP integrates seamlessly with Extron

GlobalViewer

Enterprise (GVE) software and the GlobalViewer web-based AV resource management for remote control

applications. These control processors support multiple TouchLink

Pro touchpanel interfaces over a standard Ethernet network.

Global Configurator and other useful software applications are available at www.extron.com.

Setup Checklist: How to Proceed With Installation

Get Ready

 Familiarize yourself with the features of the control processor (see Front Panel Features on page3 and Rear Panel

Features on page4) and of any TouchlinkPro touchpanels that will be part of the system.

 Download and install the latest version of the following:

• Global Configurator (GC) software — for setting up and configuring the control processor. GCProfessional and

GCPlus modes include the Toolbelt feature, IR LearnerPro (for creating IR driver files using the remote controls of AV

products if drivers are not already available from Extron), and a way to upgrade the firmware of the control processor if

the need arises.

• IPLinkPro device drivers — for use with GC, to make control of other devices possible

• GUI Designer software — for designing layouts for Extron TouchlinkPro touchpanels and third party touch interfaces

All are avail able from www.extron.com (see Locating Software, Firmware, and Driver Files on the Extron Website on

page9).

 Obtain network information for the unit from the network administrator. You will need the following details for each IPLinkPro

device:

 DHCP setting (on or off)  Subnet mask  User name

 Device (IPCP Pro, TouchlinkPro, IPLPro) IP address  Gateway IP address  Passwords

 Write down the MAC addresses of each IPLinkPro device to be used.

 Obtain model names and setup information for devices the IPCP will control.

Mount and Cable All Devices

 Mount the unit to a rack or furniture (see Mounting on page2).

 Cable devices to the control processor (see Cabling and Features on page 5).

 Connect power cords and power on all the devices.

Set Up the Control Processor and Touchpanels for Network Communication

 Connect the PC that you will use for setup, the control processor, and touchpanels to the same Ethernet subnetwork.

For control processor LAN connections, see Control, Bidirectional — LAN (Ethernet) on page6.

 Start Global Configurator and use the Toolbelt feature of the software to set the IP address, subnet, gateway IP address,

DHCP status, and related settings. See the flowchart in Network Communication Setup on page2.

All models include Extron eBUS ports, which allow a variety of control accessories (known as “endpoints”) to be

connected to a single control processor. eBUS accessories include an array of button panels, and contact input and

relay devices. Endpoints are automatically recognized by the control processor and can be added or removed at any

time.

1 2 3 4 5 6 7 8 9 10

Shrnutí obsahu

Strany 1 - IPCP Pro Series • Setup Guide

1IMPORTANT:Go to www.extron.com for the complete user guide, installation instructions, and specifications before connecting the product to the power

Strany 2 - Mounting

10IPCP Pro Series • Setup Guide (Continued)Extron Headquarters+1.800.633.9876 (Inside USA/Canada Only)Extron USA - West Extron USA - East+1.714.491.1

Strany 3 - Front Panel Features

2IPCP Pro Series • Setup Guide (Continued)Configure the Control Processor and TouchpanelsThe most basic steps are outlined below in the recommended or

Strany 4 - Rear Panel Features

3Panels and Locations of FeaturesLocation and quantity of LEDs and corresponding connectors vary by model, but the functions and port wiring are ident

Strany 5 - Cabling and Features

4IPCP Pro Series • Setup Guide (Continued)Rear Panel FeaturesLAN123GTx Rx GTx RxCOM 2 COM 3RELAYS2143CCLANeBUSFLEX I/ORELAYSIR/SERIALCOM12 VDCTx Rx GT

Strany 6 - • Use a crossover

5Cabling and FeaturesAttach cables using the following wiring diagrams as a guide. Full details are available in the IPCPPro Series User Guide.ATTENT

Strany 7 - Relay LEDs

6IPCP Pro Series • Setup Guide (Continued)Control, Bidirectional — Serial (COM)GTx RxCOM 2YYYRELAY21CTx Rx GTxRxGRTSTx Rx GTxRxGRTSCTSCTSCOM 1GTx RxRT

Strany 8 - Control — Volume

7Control, Unidirectional — IR/Serial IR/SERIAL56782134IR/S12IR/SERIAL1SG2SGIR/SERIALSGSG SGSGSGSG SGSG1 25 63 47 8Rear Panels Front PanelsSG(-)(+)(-)(

Strany 9 - Resources

8IPCP Pro Series • Setup Guide (Continued)Control, Unidirectional — Flex I/O or Digital I/O 1 234GDIGITAL I/OFLEX I/O3214GFLEXI/O3421I/O3142GroundWire

Strany 10 - Overall Configuration Steps

9About Global Conﬁgurator (with GCProfessional and GC Plus Modes)What The Software DoesGlobal Configurator is the software tool for network setup and

Komentáře k této Příručce

Žádné komentáře

Extron-electronics IPCP Pro Series Setup Guide Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Počítačové příslušenství Extron-electronics IPCP Pro Series Setup Guide. Extron Electronics IPCP Pro Series Setup Guide User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Počítačové příslušenství Extron-electronics IPCP Pro Series Setup Guide