Extron-electronics MPA 401 Series User Guide Uživatelský manuál Strana 19

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 22
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 18
Troubleshooting
Under different circumstances, the front panel LED lights green or amber, which provides
diagnostic information.
Amplier Fails to Exit Standby Mode Promptly
Power LED
Color
Problem Description Problem Solution
Amber Nooutputsignal.
• No input detected: verify that there is an
input signal.
If a signal is present, raise the input level.
• The amplifier is in standby mode and the
output has been turned off. Check the
remote port.
Greenor
Amber
Slowtoexitstandby
modewhenasignalis
present.
• The input signal may be too weak. Raise
the input level.
Amplier Enters Standby Mode Too Early
Power LED
Color
Problem Description Problem Solution
Greenor
Amber
Entersstandbymode
early.
• The input signal may be too weak. Raise
the input level.
MPA 401-70V and MPA 401-100V • Setup and Operation 13
Zobrazit stránku 18
1 2 ... 14 15 16 17 18 19 20 21 22

Komentáře k této Příručce

Žádné komentáře