Extron-electronics FOXBOX Tx_Rx DVI Plus User Guide Uživatelský manuál stáhnout pdf (Strana 41)

FOXBOX Tx/Rx • Remote Control 35

2. If you have not previously updated firmware for the FOXBOX unit before, on the Add

Device screen (figure 21), select the RS-232 tab.

If you have previously updated firmware for this model, click Cancel. The Firmware

Loader window appears. Proceed to step 5.

NOTES: • Although the screen also has a TCP/IP tab, the FOXBOX unit does not

have a LAN port. Do not select the TCP/IP tab.

• Figure 21 shows the default values.

Figure 21. Add Device Screen

3. From the drop-down menus on the RS-232 screen, select the appropriate Com port

number and baud rate (the default is 9600).

4. Click OK. The Firmware Loader window appears (figure 22).

Figure 22. Extron Firmware Loader Window

5. Select the FOXBOX unit and click File > Open. The Choose Firmware File screen

appears (figure 23).

Figure 23. Choose Firmware File Window

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 49 50

Žádné komentáře

Extron-electronics FOXBOX Tx_Rx DVI Plus User Guide Uživatelský manuál Strana 41