Extron-electronics FOX II T_R DP User Guide Uživatelský manuál stáhnout pdf (Strana 36)

FOX II DP Transmitter and Receiver • Remote Control

Figure 17. Status Window for the Receiver

Using the Software

Once you have connected to a device, the Status screen (see figure 16, on the previous

page, for the transmitter and figure 17, above, for the receiver) is the default start-up screen

for the Product Configuration Software. The screen provides indications of the connection

status.

Configuration > Status window (both units)

a Fiber Rx Link indicators

Link 2 indicator (transmitter connection) — Indicates green when the transmitter

detects light on the fiber optic cable connected to the Rx port.

Link 1 indicator (receiver connection) — Indicates green when the receiver detects

light on the fiber optic cable connected to the Tx port.

b Manufacturer fields — Indicates the manufacturer of the SFP module.

c Tx Power fields — Indicates the power on the Tx optical module of the unit in dBm.

d Rx Power fields — Indicates the power on the Rx optical module of the unit in dBm.

e Operating Temperature — Indicates the temperature in degrees Fahrenheit and

degrees Celsius.

f Video Signal Presence indicators

Transmitter connection — Indicates green when the transmitter detects a sync signal

on its DisplayPort video input.

Receiver connection — Indicates green when the receiver detects a digital video

signal on its fiber optic input.

g Audio Signal Presence indicators

Transmitter connection — Indicates green when the transmitter detects a low level

analog audio signal for a short period or embedded audio. This indicator goes dark if

the detected analog audio signal drops below the minimum threshold for a short period.

Receiver connection — Indicates green when the receiver detects an embedded

digital or low level analog audio signal on its fiber optic input.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Žádné komentáře

Extron-electronics FOX II T_R DP User Guide Uživatelský manuál Strana 36